Special Chrome Nickel Electrode with added tungsten to produce scale and wear resistance at high temperature.

A 22/10/3 Mo electrode for welding hardenable high tensile steels, armour plate, and dissimilar metal combinations including stainless to mild steel.

Superior high strength 29/9 electrode, (green coating), for welding problem or dissimilar steels, high and low carbon steels, tool and die, steels ferritic to austenitic steels, resistant to wear, heat, impact, and certain corrosive conditions.

High strength rutile coated synthetic 29/9 electrode. (green coating),  for joining and overlaying dissimilar steels, of high recovery type producing a 29/9 stainless steel weld deposit.

Vertical down 29/9 electrode, (green coating). Designed specifically to overcome difficult deslagging problems on high manganese tool steels and for root runs on certain thick sections.

High strength 29/9 electrode, (grey coating),  for welding problem or dissimilar steels, high and low carbon steels, tool and die, steels ferritic to austenitic steels, resistant to wear, heat, impact, and certain corrosive conditions.

High strength 29/9 electrode, (blue coating),  for welding problem or dissimilar steels, high and low carbon steels, tool and die, steels ferritic to austenitic steels, resistant to wear, heat, impact, and certain corrosive conditions.

High strength hardenable electrode for welding dies and tools working under heat and heavy impact, retains hardness at high temperatures and will work harden.

Tough high strength, synthetic austenitic electrode designed to resist heat and impact. Fully machinable. Weld deposit will work harden under impact and retain properties at high temperatures.

High recovery 13% manganese type electrode for welding, surfacing and building up manganese steel components.

An electrode for welding 12% Cr martensitic steels which air harden to produce high strength. (For increased toughness use E6410 NM).

A specially designed electrode for welding 12% Cr martensitic steels which air harden to produce high strength.

High quality superior low hydrogen type electrode for welding high strength martensitic corrosion resistant stainless steel. Has moisture resistant rutile flux coating with a recovery rate of approximately 150%.

An E8015-B6 low hydrogen electrode designed specifically for welding a range of 5% Cr Mo forged and cast steels.

An E8018-B6 low hydrogen electrode designed specifically for welding a range of 9% Cr Mo forged and cast steels.

An electrode for welding high strength precipitation hardened martensitic steel (hardened by copper additions).

Mac Trode E61218-G

AWS E12018-G

Low hydrogen electrode using a silicon free, low nitrogen developed for the repair of hot working dies, where a final hardness in the region of 22–30 RC is required.

Mac Trode E61418-G

AWS E14018-G

Low hydrogen electrode for the repair of hot working dies, where a final hardness in the region of 30–35 RC is required.

Mac Trode E61618-G

AWS E16018-G

Low hydrogen electrode for the repair of hot working dies, where a final hardness in the region of 38–43 RC is required.